We Offer a Variety of Steel Panels for Many Different Applications in Several Gauges and Profiles

Metal can be picked up at our warehouse at no extra cost
or we’ll have it shipped to your job site.

  • All steel can be cut to an eighth of an inch.
  • If you need something today don’t hesitate to call or stop by.
  • We carry pre-cut panels and trims in stock for your convenience.

Nearly all panels Pole Building Supplies offers come with a 45-year warranty.* It’s called MS Colorfast45® warranty which fights to prevent fading, decade after decade! The ultimate lifespan of steel roof and wall panels depends on the quality of the coating system that protects it. Inferior coatings will not protect the steel substrate from harsh elements and will be susceptible to corrosion, chalking and color fading. MS Colorfast45® is a multi-layer coating system proven superior in every respect layer by layer. They supply superior resin and superior performance, standing the test of time.

MS Colorfast45® Test Performance & Specifications

  • Humidity Resistance – No blistering, cracking, peeling, loss of gloss or softening of the finish after 1200 hours of exposure to 100% humidity at 100ºF ± 5ºF, per ASTM D 2247.
  • Chalk Resistance – No chalking greater than 8 rating on vertical applications (7 on non-vertical) per ASTM D 4214-89, Method A test procedure, after 2000 hour Weather-Ometer test.
  • Color Change – Finish color coat change not to exceed 5 Hunter units on vertical applications (6 on non-vertical) per ASTM D 2244 test procedure, after the 2000 hour Weather-Ometer test.
  • Exterior Weathering – Florida exposure (45º south) and EMMAQUA testing, per ASTM D 4141, Procedure C.
  • Abrasion Resistance – Per ASTM D 968, Method A, will pass 30 liters/mil, minimum of falling sand.
  • Salt Spray Resistance – Samples diagonally scored and subjected to 5% neutral salt spray per ASTM B 117, then taped with cellophane tape: 1000 hours-no blistering, and no loss of adhesion greater than 1/8” from the scoreline. Samples taped 1 hour after removal from test cabinet
  • Chemical Resistance – No significant color change after 24 hours exposure to 10% solutions of hydrochloric and sulfuric acids, per ASTM D 1308, Procedure 7.2, after 2000 hour Weather-Ometer test.

* Other panels carry 40-year warranties

Pole Building Supplies understands that the most important building project is the one you’re working on right now.

Whether you’re building or roofing your own home, agricultural structure, or a commercial facility, there is never a good time to cut corners. Getting it right starts with working with materials that provide durability, versatility, quality workmanship, and a wide range of ENERGY STAR® colors and profiles.

These are our most popular profiles.

  • Panel Coverage: 36”
  • Rib Height: 3/4”
  • Rib Features: Bell top trapezoidal 
rib on 9” centers
  • Standard Gauge(s): 26 ga. and 29 ga.
  • Optional Gauge(s): 24 ga.
This exposed fastened, low-profile 
panel applies over open framing or 
solid substrate.
  • Available Substrate(s): Open Framing Solid Substrate
  • Fastener(s): Exposed Fastened
  • Standard Finish(es): PVDF (Kynar 500®)
MS Colorfast45®Acrylic Coated 
Galvalume® Bare Galvanized
  • Minimum Slope Requirement: 3:12
  • Other Notes: Exposed fastened, 
low profile panel

  • Panel Coverage: 12”, 16”
  • Rib Height: 1”
  • Standard Gauge(s): 26 ga.
  • Optional Gauge(s): 24 ga.
Like all Standing Seam Roof panels, our panel 
delivers a clean, linear elegance paired with 
unmatched quality for a dependable, long-lasting 
and beautiful roof. As a direct concealed-fastened option, Image II™ provides the benefit of the same great look at a more economical price.
  • Available Substrate(s): Solid Substrate
  • Fastener(s): Standing Seam Roof Concealed Fastened
  • Standard Finish(es): PVDF (Kynar 500®)
MS Colorfast45® Acrylic Coated Galvalume®
  • Minimum Slope Requirement: 3:12
  • Other Notes: Applies over a solid substrate
 with 30# felt underlayment.

  • Panel Coverage: 36”
  • Rib Height: 1 -1/4”
  • Rib Features: Trapezoidal rib on 12” centers
  • Standard Gauge(s): 24 ga. and 26 ga.
  • Optional Gauge(s): 22 ga.
These are versatile panels and are used
in a wide variety of applications and are suited
for open framing support conditions, as well 
as a solid substrate.
  • Available Substrate(s): Open FramingSolid Substrate
  • Fastener(s): Exposed Fastened
  • Standard Finish(es): PVDF (Kynar 500®) 
MS Colorfast45® Acrylic Coated Galvalume®
  • Minimum Slope Requirement: 1:12